Soyal AR-837-E / EF / W는 ACCESS & INDUSTRIAL CONTROL 시리즈의 출입 컨트롤러입니다. AR-837-E/EE는 LCD Access Controller, AR-837-EF는 지문 리더 통합형, AR-837-W는 LCD Card Energy Saver입니다. DC 12V 전원, DC24V/1Amp 잠금 릴레이, RS-485, TCP/IP (DMOD-NETMA10 / DMOD-NETMA11), POE (AR-321L485-5V), Wiegand Output Module (AR-MDL-721V)을 지원합니다.
주요 기능
- AR-837-E / EE: LCD Access Controller; AR-837-EF: Fingerprint; AR-837-W: LCD Card Energy Saver
- Lock Relay: Blue White (N.O.) DC24V/1Amp, Purple White (N.C.) DC24V/1Amp, White (COM) DC24V/1Amp
- Door Contact (Orange) 및 Exit Switch (Purple): Negative Trigger Input
- Alarm Relay (Gray): N.O./N.C. Optional (by jumper)
- Power: Thick Red = DC 12V, Thick Black = DC 0V
- Anti-Tamper Switch: Red N.C., Orange COM, Yellow N.O.
- 확장 모듈: Wiegand Output Module (CN10), Voice Module, TCP/IP Module (RJ45) 또는 Ethernet DMOD-NETMA10 / DMOD-NETMA11, TTL to RS-485 Converter AR-321L485-5V, TCP/IP Module with POE
- Lift Controller용 RS-485: Thick Green (B-), Thick Blue (A+)
- Door Bell: Transistor Output Max. 12V/100mA (Open Collector Active Low)
- Beeper: Pink — Beeper Output 5V/100mA; LED: Yellow (Red LED Output 5V/20mA), Brown (Green LED Output 5V/20mA)
- Wiegand: Thin Green (DAT 0 Input), Thin Blue (DAT 1 Input); WG Door Contact (Orange), WG Exit Switch (Purple) — Negative Trigger Input
- Arming Output (Red White), Duress Output (Yellow White), Security trigger signal (Purple)
- User capacity: 16384 (00000~16383)
- Node ID: 1~254 (default 001); Main Door Number: 0~255; WG1 Door Number: 0~255
- Show UID: 0=No, 1=WG, 2=ABA, 3=HEX; Enable DHCP: 0=No, 1=En, 2=Exit
- Master Code 기본값: 123456 (6자리); Arming PWD: 4자리 (0001~9999, default 1234)
- PIN Code: 4자리 (0001~9999)
- Access Mode: 0=Invalid, 1=Card, 2=Card or PIN, 3=Card and PIN; Finger Identify (837-EF): 0=Must, 1=Ignore
- AR-837-EF (9000DO): 손가락당 지문 2회 수집; AR-837-EF (1500DO): 손가락당 3회 수집
- Anti-pass-back: finger 또는 card로 지원; AR-721-U, AR-737-H/U (WG mode), AR-661-U 사용 시 access mode는 반드시 "Card" only여야 함
- Lift control: AR-401RO16B 연결 (BAUD 9600); Single Floor 1~64; Multi Floor 16자리 [0:disable, 1:enable]
- Terminal Port: 0=Lift, 1=Host, 2=LED, 3=PRN (default 1); Baud default 9600
- Arming Delay Time: 000~255초; Armed pulse output time (10ms): 000~255
- Daily Alarm: Set (00~15), Start Tm 24시간, Effect Sec. (1~255), Weekday (0:disable, 1:enable)
- 매립 컷아웃 치수: 837-E 85mm x 113mm; 837-EF 128mm x 109mm
- 연결: RS-485, TCP/IP (DMOD-NETMA10 / DMOD-NETMA11), POE (AR-321L485-5V), Wiegand
- 키패드 또는 701Server / 701Client 소프트웨어로 구성
- Reset: 전원 공급 상태에서 main board의 RESET 버튼을 LED ERR (Red) 점등까지 누름; Factory Reset은 Parameters2 → Factory Reset (0: System Param, 1: User Setting, 2: System & User)
- Firmware Upgrade는 UdpUpdater 소프트웨어로 수행
적합한 용도
- 사무실 출입 통제
- 공장 / 산업 출입 통제
- 엘리베이터 통제 (Lift control)
- 근태 관리 / 사용자 관리 시스템
- Wiegand를 통한 controller 통합
견적 문의는 0796 700 777로 연락하십시오.
| Dòng sản phẩm | ACCESS & INDUSTRIAL CONTROL |
|---|---|
| Model | AR-837-E / AR-837-EF / AR-837-W |
| Phân loại | AR-837-E/EE: LCD Access Controller; AR-837-EF: Fingerprint; AR-837-W: LCD Card Energy Saver |
| Nguồn | DC 12V (Thick Red = DC 12V, Thick Black = DC 0V) |
| Lock Relay 1 | Blue White (N.O.) DC24V/1Amp |
| Lock Relay 2 | Purple White (N.C.) DC24V/1Amp |
| Lock Relay COM | White (COM) DC24V/1Amp |
| Door Contact | Orange — Negative Trigger Input |
| Exit Switch | Purple — Negative Trigger Input |
| Alarm Relay | Gray — N.O./N.C. Optional (by jumper) |
| Anti-Tamper Switch | Red N.C., Orange COM, Yellow N.O. |
| HID RF Module | Orange ANT 1, Purple ANT 2, Black DC 0V, Red DC 5V, Blue Wiegand DAT 1 Input, Green Wiegand DAT 0 Input, White -- |
| Voice Module | Black DC 0V, Yellow TX, White TE, Orange RX, Red DC 5V, Blue --; yêu cầu speaker 8Ω / 1.5W (Max. 2W) |
| TCP/IP Output | Orange White Net TX+, Orange Net TX-, Green White Net RX+, Green Net RX- |
| RS-485 for Lift Controller | Thick Green RS-485 (B-), Thick Blue RS-485 (A+) |
| Door Bell | Black White Transistor Output Max. 12V/100mA (Open Collector Active Low), Black DC 0V |
| Beeper | Pink — Beeper Output 5V/100mA, Low |
| LED | Yellow Red LED Output 5V/20mA, Brown Green LED Output 5V/20mA |
| Door Output | Blue White Transistor Output Max. 12V/100mA (Open Collector Active Low) |
| Wiegand | Thin Green Wiegand DAT 0 Input, Thin Blue Wiegand DAT 1 Input |
| WG Door Contact | Orange — Negative Trigger Input |
| WG Exit Switch | Purple — Negative Trigger Input |
| Reserved | Red -- |
| Security trigger signal | Purple |
| Arming Output | Red White |
| Duress Output | Yellow White |
| User capacity | 16384 (00000~16383) |
| Node ID | 1~254 (default value: 001) |
| Main Door Number | 0~255 |
| WG1 Door Number | 0~255 |
| Show UID | 0=No, 1=WG, 2=ABA, 3=HEX |
| Enable DHCP | 0:No, 1:En, 2=Exit |
| Master Code | 6 chữ số (default 123456) |
| Arming PWD | 4 chữ số (0001~9999; Default: 1234) |
| Duress Code | 4 chữ số (0001~9999), 4 sets (select one); chỉ khả dụng ở networking mode |
| PIN Code | 4 chữ số (0001~9999) |
| Access Mode | 0: Invalid; 1: Card; 2: Card or PIN; 3: Card and PIN |
| Finger Identify (837-EF) | 0: Must; 1: Ignore |
| Vân tay AR-837-EF (9000DO) | Thu thập 2 lần cho mỗi ngón |
| Vân tay AR-837-EF (1500DO) | Thu thập 3 lần cho mỗi ngón |
| Xoá toàn bộ FP | Key in 99999 |
| Terminal Port | 0:Lift; 1:Host; 2:LED; 3:PRN (default value: 1) |
| Baud Selection | default value: 9600 |
| Arming Delay Time | Delay time (Sec): 000~255; Armed pulse output time (10ms): 000~255 |
| Daily Alarm | Set (00~15); Start Tm 24 Hours; Effect Sec. Range 1~255; Weekday (0:disable, 1:enable) |
| Single Floor | 1~64 |
| Multi Floor | 16 chữ số [0:disable, 1:enable] |
| Lift control | Kết nối AR-401RO16B (BAUD 9600) |
| Kích thước khoét âm 837-E | 85mm x 113mm |
| Kích thước khoét âm 837-EF | 128mm x 109mm |
| Module mở rộng | Wiegand Output Module (AR-MDL-721V, CN10); Voice Module; TCP/IP Module kèm RJ45 hoặc Ethernet DMOD-NETMA10 / DMOD-NETMA11; TTL to RS-485 Converter AR-321L485-5V; TCP/IP Module with POE |
| Kết nối | RS-485, TCP/IP, POE, Wiegand |
| Khuyến nghị dây | AWG 22-24 Shielded Twist Pair; CAT 5 cho TCP/IP; tránh star wiring |
| Cấu hình | Bàn phím hoặc phần mềm 701Server / 701Client |
| Reset IP Setting | Nhấn nút RESET trên main board khi đang cấp nguồn đến khi LED ERR (Red) sáng |
| Factory Reset | Parameters2 → Factory Reset → 0: System Param; 1: User Setting; 2: System & User |
| Firmware Upgrade | Phần mềm UdpUpdater |
| Số trang tài liệu | 8 |