Security insights for
enterprise decision-makers
478 in-depth articles on AI cameras, loss prevention, access control, and smart building technology — written for people who make purchasing decisions.
Site Preparation for Truck and Barge Volume Measurement Stations
Installing a volume measurement station is not just about buying equipment. The project owner needs to prepare the site, power supply, vehicle list, and operating rules so the station runs stably from day one. This article compiles a checklist for truck and barge measurement stations, along with common mistakes that make data unusable.
Trip-Based Material Volume Management Software: Shift Reports & Contractor Reconciliation
Trip-based material volume management is not just record-keeping. It is the reconciliation between the investor, the contractor, and the transport unit, where every m³ must have a photo, a clip, a 3D model, and a confidence score. This article analyzes how material volume management software organizes data by shift, by contractor, and by vehicle; how it handles the verification queue and the mistakes that prolong payment reconciliation.
Calibration and Acceptance of LiDAR Volume Measurement Systems: A 5-Step Process
A LiDAR volume measurement system is only valuable when properly calibrated and accepted. This article presents 5 calibration steps — reference steel block, empty vehicle run 3 times, loaded vehicle cross-check, barge hold template, periodic checks — followed by a 4-week trial run and acceptance, with a proposed criteria table and common mistakes.
Mineral Transport Monitoring: A Digital Solution for Every Truck Trip
A draft regulation from the Ministry of Agriculture and Environment (03/2025) proposes installing smart cameras at mineral transport exit points from mining sites. This article analyzes how Smart Box AI uses 3D LiDAR and AI cameras to record license plates, images, 3D models, and actual m³ delivered for each truck and barge trip.
AI Camera License Plate Recognition for Trucks at Site Gates: Automated Volume Measurement Solution
Smart Box AI combines an 8MP AI camera for truck license plate recognition with 3D LiDAR at construction site and mine gates: measures m³ per trip without stopping vehicles, alerts on unknown vehicles, underloading, and incomplete dumping.
Truck Weighbridge and Volume Measurement Systems: Comparison and Applications
A truck weighbridge gives tonnage; a LiDAR-based volume measurement system gives m³ and per-trip evidence. This article compares the two measurement methods and how to combine them when accepting bulk materials.
Acceptance of Backfill Material Volume: Digital Transformation from Manual Measurement to Per-Trip Data
Manual measurement and trip counting provide no evidence for reconciliation during backfill volume acceptance. Smart Box AI uses 3D LiDAR and AI cameras to record license plates, images, 3D models, and actual delivered m³ per trip, serving as the basis for payment reconciliation with contractors.
Measuring Sand Volume on Barges with 3D and AI Technology: A Solution Independent of Tides
Smart Box AI measures sand on barges using two independent methods: LiDAR 3D scanning of the cargo hold and draft measurement on entry and exit. The commodity is calculated by the hold opening, so tides do not distort the results; if the two methods diverge significantly, the case is escalated to staff for confirmation.
AI-Powered Solution for Controlling Sand, Soil, and Stone Transport Vehicles at Construction Sites
Underloading, incomplete discharge, vehicle swapping, or raised bed sides are common loopholes when controlling sand, soil, and stone transport vehicles at construction sites. Smart Box AI combines 3D LiDAR and AI cameras to measure m³ per trip, flag abnormal trips, and reconcile with contractors.
Truck Bed Volume Measurement with 3D LiDAR: Point Cloud Scanning as Trucks Pass the Gate
Truck bed volume measurement with 3D LiDAR enables calculating m³ per trip as trucks drive through the gate without stopping. This article explains the point cloud scanning principle, installation requirements, the in–out measurement process, and how to calibrate before using measurements for acceptance. It also introduces Smart Box AI, the truck and barge volume measurement system deployed by An Ninh Số.
Axis Q1656-LE Camera 4K Outdoor IK10: Infrastructure Project Solution
Critical infrastructure projects (factories, warehouses, bridges and roads) in Vietnam are facing harsh outdoor surveillance challenges: dust, rain, wind, and vandalism risks. The Axis Q1656-LE 4K camera with IK10 impact-resistant housing and ARTPEC-8 AI chip offers a smart, durable surveillance solution for projects requiring absolute reliability. This article analyzes features, benefits, and real-world applications in detail.
Stable Parking Control Equipment: 2026 Solution Selection Guide
Parking lots frequently congested during peak hours, staff recording tickets incorrectly, and revenue losses that are difficult to control are chronic problems for many buildings, apartments, and shopping centers in Vietnam. This article analyzes the core components that make up a stable parking control system, criteria for selecting suitable equipment, and a deployment roadmap to help businesses operate parking lots safely, transparently, and cost-effectively.
Start with a free 60-minute site survey
Our senior technical team will visit your site, assess the current setup, and propose a bundle matched to your business model and budget.