Face ID at apartment building entrances is gradually replacing proximity cards and fingerprint recognition thanks to its convenience and high security. However, actual deployments at many buildings in Vietnam show that quite a few systems experience false recognition errors, weak lighting, or slow processing speeds, causing frustration among residents. Below are the 5 most common problems when installing face recognition at apartment building entrances and detailed remediation guidance for the building management board.

1. False recognition or failure to recognize faces

1. False recognition or failure to recognize faces

False recognition errors usually occur when the Face ID camera is placed at the wrong angle, light shines directly into the lens, or the resident's face is partially obscured by a mask or sunglasses. The solution is to adjust the camera height to eye level, add infrared LED lights to balance the lighting, and update the AI software to handle cases of partial face covering.

  • The camera should be placed at a height of 1.4–1.6 meters, with a tilt angle of 10–15° relative to the ground.
  • Use 3–5W infrared LED lights to provide supplementary lighting when light is insufficient.
  • Enable "anti-spoofing" mode to avoid mistakenly recognizing photos or videos.

2. Slow processing speed during peak hours

2. Slow processing speed during peak hours

When resident traffic surges (7 a.m.–8 a.m., 5 p.m.–7 p.m.), Face ID devices may process slowly due to a full cache or CPU overload. The consequence is long queues of people waiting, causing congestion at the entrance. The remedy is to upgrade to devices with a dedicated AI chip (e.g., ZKTeco SpeedFace-V5L) or add a separate lane for visitors.

CauseImpactSolution
Low-tier device CPU (ARM Cortex-A7)Recognition time >2 secondsUpgrade to an AI chip (Cortex-A53 or higher)
RAM <512MBLag when many people scan at the same timeChoose a device with RAM ≥1GB
Software with unoptimized algorithmsRepeated recognition multiple timesUpdate to the latest firmware from the manufacturer

3. Impact of low-light or backlight conditions

Low light at night or backlight from glass doors prevents the Face ID camera from capturing enough facial detail, leading to recognition rejection. The solution is to install a camera with a large image sensor (1/2.8" or larger) combined with an 850nm wavelength infrared illuminator, and to configure a ROI (Region of Interest) to prioritize processing of the face area.

4. Data synchronization errors between gates and management software

4. Data synchronization errors between gates and management software

When a building has multiple entry gates (main gate, secondary gate, basement gate), resident facial data may not synchronize in time, causing recognition to work at gate A but not at gate B. The cause is usually an unstable LAN connection or incorrect configuration of the central management software. Check the network cabling, use quality PoE switches, and configure real-time synchronization via the TCP/IP protocol.

5. Improper device maintenance reduces service life

Face ID cameras installed outdoors or in corridors are prone to dust and moisture buildup, which blurs the lens and reduces recognition accuracy. Many building management teams skip periodic cleaning schedules, leading to premature device failure. The solution is to wipe the camera lens with a dry microfiber cloth every week, check the waterproof rubber gaskets monthly, and perform overall system maintenance every 6 months.

Professional Face ID solution for apartment buildings from Viet Duc Tri Group

Professional Face ID solution for apartment buildings from Viet Duc Tri Group

Viet Duc Tri Group provides a comprehensive face recognition solution for apartment building gates, from ZKTeco face recognition readers, tripod turnstiles, and swing barriers to centralized management software. The system supports integration with floor elevator control, employee time attendance, and real-time security alerts. Contact us now for a survey and consultation on the optimal solution for your building.

  • ZKTeco SpeedFace-V5L face recognition device with IP65 water resistance.
  • Kapaisi KPS-TD-3301 swing barrier gate in premium 304 stainless steel.
  • Resident management software with real-time data synchronization via cloud.

FAQ about Face ID for apartment building gates

Can Face ID at apartment building gates recognize people wearing face masks?

New-generation Face ID devices such as the ZKTeco SpeedFace-V5L have AI algorithms that recognize the eye and forehead area, and still work well when users wear face masks. However, accuracy drops by about 15–20% compared with full-face recognition. RFID cards or QR codes should also be combined to increase redundancy.

How much does it cost to install a Face ID system for a 500-apartment building?

Costs range from 250–450 million VND depending on the number of gates (usually 4–6 gates) and the type of equipment. This includes face readers, tripod/swing barrier gates, management software, installation and a 12-month warranty. Contact Việt Đức Trí Group via hotline 0935 295 337 for a detailed quote for your building.

Can the Face ID system be integrated with floor elevators?

Yes. Việt Đức Trí Group's face recognition system for apartment building gates supports integration with elevator controllers via RS485 or TCP/IP protocols. When a resident is recognized at the gate, the system automatically calls the elevator and opens the corresponding floor, providing a seamless travel experience.

How do you handle cases where Face ID cannot recognize visiting guests?

The system usually has a "guest check-in" mode that allows security staff to enter guest information manually via the touchscreen or a mobile app. Guests receive a temporary QR code to scan through the gate. Some devices also support direct video calls to the apartment so residents can confirm remotely.

Is Face ID at apartment building gates easy to hack or spoof?

Modern devices all integrate anti-spoofing technology using 3D infrared sensors or skin texture analysis, which helps detect photos, videos or masks. However, to ensure maximum safety, you should choose products from reputable brands such as ZKTeco and Suprema and regularly update the firmware.

If you are experiencing issues with face recognition at apartment building gates or want to upgrade the access control system for your building, contact Việt Đức Trí Group now via hotline 0935 295 337 or email [email protected] for free consultation and survey.