The Face ID system for industrial park factory gates is a biometric access control solution, combining AI facial recognition readers, turnstiles or barriers, and automated timekeeping software. In Vietnam, industrial parks are transitioning from magnetic cards/fingerprints to Face ID to enhance security, reduce fraud, and optimize labor management.

2026 Factory KCN Face ID Quotation: Price List for 3 Packages

2026 Factory KCN Face ID Quotation: Price List for 3 Packages

The 2026 Face ID quotation for factory KCN is divided into 3 packages: Basic (20-40 million VND/gate), Standard (40-80 million VND/gate), Premium (80-150 million VND/gate). The cost depends on the number of gates, type of turnstile, reader brand (ZKTeco, Suprema), and integration requirements for barriers/license plates.

PackageMain EquipmentSoftwareReference Price (VND/gate)Suitable For
BasicZKTeco SpeedFace-V5L Face ID Reader, Tripod TurnstileBasic timekeeping software (shift management, reports)20,000,000 - 40,000,000Factories with under 500 workers, 1-2 gates
StandardSuprema FaceLite Face ID Reader, Swing Barrier or Optical TurnstileSoftware with integrated timekeeping + advanced access control40,000,000 - 80,000,000Factories with 500-1500 workers, 2-4 gates
Premium3D AI Anti-Spoofing Reader (Suprema BioStation 3), Speed Gate + LPR BarrierComprehensive software: timekeeping, shift management, real-time reports, HR integration80,000,000 - 150,000,000Large factories (>1500 workers), KCN requiring high security, vehicle barrier integration

Factors Affecting the Face ID Quotation for Factory KCN

Factors affecting the Face ID quotation for factory KCN

The Face ID quotation for factory KCN depends not only on the equipment but also on the number of gates, gate type (turnstile, barrier), waterproofing requirements (IP65), HR software integration, and network infrastructure survey. Each factor impacts the total investment cost.

  • Number of gates and traffic volume: Main gates (worker entry/exit during peak hours) require Speed Gates or Optical Turnstiles, while secondary gates can use Tripod Turnstiles.
  • Type of facial recognition reader: 2D readers (ZKTeco SpeedFace-V5L) are cheaper but easily fooled by photos; 3D readers (Suprema BioStation 3) are anti-spoofing, suitable for factories requiring high security.
  • IP waterproofing requirements: Outdoor factories, coastal KCNs require IP65 or higher equipment, increasing costs by 15-25%.
  • LPR barrier integration: If the factory has trucks and containers entering/exiting, LPR barrier integration is needed, adding 30-60 million VND/gate.
  • Software and HR integration: Basic software is free, but HR integration (timekeeping, payroll, reports) can add 5-15 million VND/year.
  • Survey, installation, and maintenance costs: Typically account for 10-20% of the total contract value.

Comparison of Face ID with Magnetic Cards and Fingerprints for Factory KCN

Comparison of Face ID with magnetic cards and fingerprints for factory KCN

Face ID is superior to magnetic cards (easily lost, lent out) and fingerprints (affected by production environment). However, the initial investment cost is higher. The table below compares the 3 technologies for factory KCN.

CriteriaFace IDMagnetic CardFingerprint
Initial investment cost (per gate)20-150 million VND5-15 million VND10-30 million VND
Annual operating cost2-5 million VND (maintenance)10-30 million VND (card replacement)3-8 million VND (cleaning, maintenance)
SecurityHigh (3D, anti-spoofing)Low (easily lent, counterfeited)Medium (fingerprints can be copied)
Recognition speed0.3-0.8 seconds0.5-1 second1-2 seconds
Environmental impactNone (natural face)NoneYes (dust, oil, sweat)
Equipment durabilityHigh (IP65, heat resistant)Medium (cards easily damaged)Medium (sensor wear)

Case study: Garment factory in Binh Duong KCN reduces management costs by 40% thanks to Face ID

A garment factory (scale of 1200 workers, Binh Duong KCN) previously used magnetic cards, losing 3-5% of cards monthly, with workers often swiping cards for each other. After installing the Standard Face ID package (Suprema FaceLite + Swing Barrier, 4 gates), results after 6 months: management costs reduced by 40%, no more timekeeping fraud, check-in time decreased from 15 minutes to 3 minutes.

Deployment process for the Face ID system in factory KCN

Deployment process for the Face ID system in factory KCN

Deploying a Face ID system for factory KCN includes 5 steps: site survey, solution consultation, equipment installation, software setup, handover and warranty