In the seafood processing industry, false rejects from metal detectors are a costly issue: businesses lose 10-20% of output per shift due to false alarms from aluminum packaging, fish bones, or electromagnetic interference. This case study documents the journey of Hai Van Seafood Processing Plant in Can Tho — reducing product defects by 95% after switching to the Mettler Toledo Safeline X37 metal detector deployed by Việt Đức Trí Group.

Customer Information

  • Customer: Hai Van Seafood Processing Co., Ltd.
  • Industry: Export seafood processing (shrimp, pangasius, squid)
  • Scale: 1 plant, 200 workers, 2 production shifts/day
  • Location: Tra Noc Industrial Park, Can Tho
  • Output: 5,000 tons of product/year

Customer Problem

Customer Problem
  • False rejects accounted for 15% of output per shift: The old metal detector (Japanese brand, 2015 model) falsely flagged approximately 15% of good products as metal-contaminated, primarily due to packaging with thin aluminum layers and small fish bone fragments (under 2mm) causing interference.
  • Reprocessing costs up to VND 1.2 billion/year: Each shift required reprocessing 300-400 kg of rejected products, including labor, electricity, water, and raw material loss costs. Total cost estimated at VND 1.2 billion/year.
  • Time lost to manual inspection: 3 QC staff per shift had to spend 2-3 hours re-inspecting rejected products, putting pressure on delivery schedules.
  • Risk of losing export customers: Japanese and EU customers required a false reject rate below 1%; failure to meet this could result in contract penalties or lost orders.

Solution Deployed by Việt Đức Trí Group

Solution Deployed by Việt Đức Trí Group

Việt Đức Trí Group proposed the Mettler Toledo Safeline X37 metal detector, integrating advanced digital signal processing technology to eliminate interference from packaging and non-metallic particles, reducing false rejects to a minimum. The deployment process consists of 4 steps, from site survey to official operation.

  1. Site survey and baseline measurement: Việt Đức Trí Group technicians recorded the current false reject rate (15%), analyzed interference causes (aluminum packaging, fish bones, electromagnetic interference from conveyor motors). Used a frequency spectrum analyzer to identify the interference range.
  2. Consultation on Mettler Toledo Safeline X37 configuration: Selected the X37 model with an aperture size of 400x200mm (suitable for package size 300x150mm). Set the operating frequency to 800 kHz to optimize detection of ferrous, steel, and stainless steel metals in a low-interference environment.
  3. Installation and integration into the line: Mounted the detector on the main conveyor after the packaging stage, connected the reject signal to the pneumatic system for automatic removal of defective products. Installed an additional Active Noise Filter to reduce interference from the conveyor motor.
  4. Operation training and optimization: Trained 2 QC shifts and 4 maintenance technicians on parameter settings (sensitivity, conveyor speed, reject threshold). Conducted a test of 1,000 product samples with standard metal inserts (Fe 0.8mm, SUS 1.2mm) for calibration. After 2 weeks of trial operation, adjusted sensitivity down by 10% to balance defect detection and false rejects.

Results Achieved After 3 Months of Deployment

Results Achieved After 3 Months of Deployment
  • 95% reduction in false rejects: From 15% of output per shift down to 0.75% — equivalent to 1,125 tons of good product saved each year.
  • VND 1.1 billion in reprocessing cost savings: Reprocessing costs decreased from VND 1.2 billion/year to VND 100 million/year (cost of handling actual rejected products).
  • 12% increase in packaging productivity: Thanks to reduced manual inspection time, the packaging line increased from 60 packs/minute to 67 packs/minute.
  • ROI in 8 months: Total investment of VND 750 million (detector + installation + training) was recouped after 8 months through reprocessing cost savings and productivity gains.
"Before, I had to spend 3 hours per shift re-inspecting rejected products, and often felt stressed because Japanese customers complained about quality. Since getting the Mettler Toledo X37 from Việt Đức Trí Group, false rejects are nearly zero. We save billions of VND each year. Việt Đức Trí's technical team provides very fast support — just one call and they are on-site within 2 hours."
— Mr. Nguyen Van Hai, Production Director, Hai Van Seafood Processing Co., Ltd.

Lessons Learned and Application for Other Businesses

Lessons Learned and Application for Other Businesses

From this case study, there are 4 important lessons for food and seafood processing businesses when investing in metal detectors. First, thorough site survey helps select the right model and configuration, reducing false rejects from the start. Second, investing in a high-end detector like the Mettler Toledo Safeline X37 is an investment with clear ROI (under 1 year) thanks to reprocessing cost savings and productivity gains. Third, operator training is a key factor — without knowledgeable technicians, the detector may be misconfigured, leading to a return of high false reject rates. Finally, partnering with a reputable mettler toledo distributor like Việt Đức Trí Group ensures fast technical support, genuine warranty, and available spare parts.

For other food processing businesses (meat, fruits and vegetables, confectionery), this solution is fully applicable. Only the aperture size and operating frequency need to be adjusted to suit product specifics. Việt Đức Trí Group is ready to provide free consultation and conduct a site survey within 2 working days.

Comparison of Mettler Toledo Safeline X37 Metal Detector with Old Detector

Comparison of Mettler Toledo Safeline X37 Metal Detector with Old Detector

To clearly illustrate the difference, the comparison table below contrasts the Mettler Toledo Safeline X37 metal detector with the old detector (Japanese brand, 2015 model) based on actual operating criteria at the Hai Van plant.

CriteriaOld Detector (Japanese, 2015)Mettler Toledo Safeline X37
False reject rate15%0.75%
Fe metal detection capability1.5mm0.8mm
SUS stainless steel detection capability2.5mm1.2mm
Aluminum packaging interference handlingNo filterActive Noise Filter
Maximum conveyor speed40 m/min60 m/min
Annual maintenance costVND 80 millionVND 25 million
Calibration time1 hour/session15 minutes/session

Frequently Asked Questions (FAQ)

How much does the Mettler Toledo Safeline X37 metal detector cost?

The reference price for the X37 model with a 400x200mm aperture ranges from VND 600-800 million depending on configuration (noise filter, integrated conveyor, management software). Việt Đức Trí Group provides a detailed quotation after a site survey, including a 2-year maintenance package and free operator training.

What is the delivery and installation time for the Mettler Toledo metal detector?

Delivery time is 2-4 weeks (depending on model and stock availability). Installation and integration into the line takes 3-5 working days, including survey, mechanical installation, electrical connection, and calibration. Việt Đức Trí Group commits to handover within 30 days from order placement.

Can the Mettler Toledo detector detect fish bones or non-metallic contaminants?

The Mettler Toledo metal detector only detects metals (ferrous, steel, stainless steel, copper, aluminum). To detect fish bones, glass, stones, or hard plastics, businesses need to combine it with an X-ray detector (e.g., Mettler Toledo X35 or X38). Việt Đức Trí Group advises on integrated solutions using both technologies for comprehensive quality control requirements.

What is the warranty for the Mettler Toledo Safeline X37 metal detector?

Việt Đức Trí Group provides a genuine 24-month warranty for the Mettler Toledo Safeline X37 metal detector, including replacement parts (free installation labor). Extended warranty for an additional 12 months at a preferential cost. Remote technical support available 24/7, with on-site presence at the plant within 4 hours (Ho Chi Minh City, Can Tho, Dong Nai areas).

How to distinguish an authorized mettler toledo distributor?

An authorized mettler toledo distributor in Vietnam must have an authorization certificate from Mettler Toledo Switzerland (verifiable via mt.com). Việt Đức Trí Group is an official authorized distributor, providing products with anti-counterfeit stamps, global warranty, and a technical team trained at the Mettler Toledo factory in Switzerland.

Can the Mettler Toledo detector integrate with a Manufacturing Execution System (MES)?

Yes. The Mettler Toledo Safeline X37 metal detector supports OPC UA, Modbus TCP/IP, and Profinet protocols, allowing direct connection to MES, ERP, or SCADA systems. Reject data, productivity, and alerts are recorded in real-time, serving traceability and quality reporting for export customers.

What is the operating cost of the Mettler Toledo Safeline X37 metal detector?

Annual operating cost is approximately VND 25-30 million, including electricity (0.5 kWh), periodic maintenance (2 times/year), and calibration (1 time/year). Compared to the old detector (VND 80 million/year), the savings are VND 55-60 million/year. Expected machine lifespan is 8-10 years.

Can I try the Mettler Toledo metal detector before purchasing?

Việt Đức Trí Group offers a 30-day trial service for businesses in Ho Chi Minh City, Can Tho, Dong Nai, and Binh Duong. Customers only need to sign a rental contract, pay a 30% deposit of the machine value, and receive free installation support. If not satisfied, return the machine and receive the deposit back after 30 days.