Avigilon H4 Multisensor is a 4x5MP (20MP total) multisensor camera covering 360° — replacing 4 standard cameras with a single device. Each sensor adjusts its angle independently, suited for large lobbies, intersections, and parking lots — where full-scene surveillance is needed without installing multiple cameras.
Self-Learning Analytics runs on all 4 channels simultaneously — learning patterns and alerting on anomalies across the full 360°. Integrates AI Search-by-Description via ACC VMS for fast video search. One IP address, one PoE — simplifying network infrastructure and reducing switch costs.
The H4 Multisensor suits bank lobbies, airports, and shopping malls — where wide-area coverage is needed while maintaining aesthetics (fewer cameras on the ceiling). Initial cost is higher than 4 single cameras, but it saves 60% on installation and long-term maintenance costs. North American-standard technical support via Motorola Solutions.
| Number of sensors | 4 independent sensors |
|---|---|
| Resolution per sensor | 5MP (2688x1944) |
| Total resolution | 20MP |
| Coverage angle | 360° (4 directions) or 180° (2 directions) |
| Self-Learning Analytics | Yes — on all 4 channels |
| WDR | Up to 140dB |
| Framerate | 30fps per sensor |
| Compression standard | H.264, H.265 |
| PoE | IEEE 802.3bt (PoE++) |
| Weatherproof rating | IK10, IP66 |
| Operating temperature | -40°C to +50°C |
| Warranty | 3 years Motorola Solutions |
- Bank lobby — 360° coverage of the entire transaction area with one camera
- Traffic intersection — monitor 4 directions simultaneously, saving mounting poles
- Parking lot — cover the entire lot with fewer cameras, reducing infrastructure costs
- Airport — monitor wide check-in areas, integrate AI Search to find passengers
- Shopping mall — cover the main lobby while maintaining ceiling aesthetics
Frequently Asked Questions
- How many single cameras can the H4 Multisensor replace?
Replaces 4 single cameras in most cases. However, if long-range zoom is needed (face recognition >10m), additional PTZ or tele bullet cameras are still required.
- Can each sensor's angle be adjusted after installation?
Yes — each sensor adjusts independently by hand or via ACC software. We recommend consulting on mounting angles before installation to optimize coverage.
- Does PoE++ (802.3bt) require a special switch?
Yes — a switch supporting PoE++ (60W/port) is required. Standard PoE switches (802.3af/at) do not provide enough power for 4 sensors simultaneously.
- How does the H4 Multisensor cost compare to 4 Hikvision 5MP cameras?
2-3 times higher for the device, but saves 60% on installation costs (fewer cables, fewer poles) and 50% on switch costs (1 port instead of 4). Clear ROI after 2-3 years of operation.
| Số cảm biến | 4 cảm biến độc lập |
|---|---|
| Độ phân giải mỗi cảm biến | 5MP (2688x1944) |
| Tổng độ phân giải | 20MP |
| Góc phủ | 360° (4 hướng) hoặc 180° (2 hướng) |
| Self-Learning Analytics | Có — trên cả 4 kênh |
| WDR | Lên đến 140dB |
| Framerate | 30fps mỗi cảm biến |
| Chuẩn nén | H.264, H.265 |
| PoE | IEEE 802.3bt (PoE++) |
| Chuẩn chống nước | IK10, IP66 |
| Nhiệt độ hoạt động | -40°C đến +50°C |
| Bảo hành | 3 năm Motorola Solutions |
- Sảnh ngân hàng — phủ 360° toàn bộ khu vực giao dịch bằng một camera
- Ngã tư giao thông — giám sát 4 hướng đồng thời, tiết kiệm cột lắp
- Bãi đỗ xe — phủ toàn bộ bãi với ít camera, giảm chi phí hạ tầng
- Sân bay — giám sát khu check-in rộng, tích hợp AI Search để tìm hành khách
- Trung tâm thương mại — phủ sảnh chính mà giữ thẩm mỹ trần
Câu hỏi thường gặp
- How many single cameras can the H4 Multisensor replace?
Replaces 4 single cameras in most cases. However, if long-range zoom is needed (face recognition >10m), additional PTZ or tele bullet cameras are still required.
- Can each sensor's angle be adjusted after installation?
Yes — each sensor adjusts independently by hand or via ACC software. We recommend consulting on mounting angles before installation to optimize coverage.
- Does PoE++ (802.3bt) require a special switch?
Yes — a switch supporting PoE++ (60W/port) is required. Standard PoE switches (802.3af/at) do not provide enough power for 4 sensors simultaneously.
- How does the H4 Multisensor cost compare to 4 Hikvision 5MP cameras?
2-3 times higher for the device, but saves 60% on installation costs (fewer cables, fewer poles) and 50% on switch costs (1 port instead of 4). Clear ROI after 2-3 years of operation.