Controller 7000 Single Door (C7000 SD) is a network-connected controller that provides a complete and flexible solution for system expansion. The C7000 SD Power over Ethernet versions are designed to eliminate the need for power supplies, cabinets, and costly long cable runs — reducing installation cost and time. This compact device is a lower-cost controller that can be used for system communication, alarm monitoring, perimeter security, and peripheral device control. The C7000 SD is designed to operate standalone or as an addition to existing Gallagher devices. The Controller 7000 Single Door PoE+ RS485 is powered via PoE+ (recommended) or PoE. There is a battery connection and charging option if power backup is required. This device communicates via RS485 protocols such as HBUS and OSDP. SKU: BVC400011.

Key Features
- Complete solution for single door access control with multiple readers.
- Power over Ethernet version connects directly to the building's structured cabling system.
- DC power version available for cabinet installation.
- PoE+ battery charging option for local power backup.
- Fully authenticated and encrypted connection with all Controllers and other Gallagher devices in the system.
- Supports centralized or distributed building wiring structures.
- Supports up to 6 onboard inputs for all power, door, and alarm sensors.
- Onboard relay output and transistor output for sirens or strobes, etc.
- Transistor output can be used as a second relay with the Gallagher Controller 7000 relay board.
- Onboard front and rear tamper for out-of-cabinet installation.
- Mounting plates, mounting blocks, and DIN rail adapters available for flexible installation options.
- High-speed RS-485 connection and firmware updates for downstream devices.
- Supports integrated perimeter security.
- Supports elevator control.
- Supports direct integration with building management systems.
- A future High Security version will be available for sites with specific security standard and/or Government compliance requirements.
- Supports controller-based API for direct communication with third-party systems.
- Full intrusion alarm support combined with up to 256 HBUS IO and one Gallagher T20.

Ideal For
- Single door access control
- System communication
- Alarm monitoring
- Perimeter security
- Peripheral device control


Contact 0796 700 777 for a quote.
| SKU | BVC400011 |
|---|---|
| Nguồn | DC - 13.6 v DC±15% V |
| Nhiệt độ hoạt động | -10°C to +50°C (14°F to +122°F) |
| Kích thước | 115 x 115 x 33 mm |
| Kết nối mạng Ethernet | 10/100 Base T Ethernet Port |
| Giao tiếp thiết bị RS485 | 115.2Kbit/s, dependent on cable type |
| Giao thức TCP/IP | 256bit AES* symmetric encryption for Controller to Server and Inter-Controller communications |
| Tuân thủ tiêu chuẩn | CE, RCM, FCC, UL |