Sensormatic AMS-9060 — Overhead RFID Antenna cho retail entrance

IN STOCK OFFICIAL WARRANTY 12-24 MONTHS SENSORMATIC SOLUTIONS
Category: EAS & RFID Retail Labels · SKU: AMS-9060
Request a quote
Pricing depends on project scope — contact us for free consultation and a quote within 24 hours.
The Sensormatic AMS-9060 is an overhead RFID antenna mounted on the store entrance ceiling — a hidden alternative to traditional EAS pedestal gates. Ideal for premium flagship stores that do not want exposed EAS gates disrupting their design. It delivers a 3-4m diameter read zone covering the entire entrance, reads 200+ tags per second, and integrates with the TrueVUE platform for SKU-level loss prevention.
  • Anten overhead hidden — không phá design entrance
  • Đọc đồng thời 200+ tag/giây trong vùng 3-4m
  • Tích hợp TrueVUE platform — log loss prevention SKU-level
  • Power-over-Ethernet PoE+ single cable
  • Compatible với mọi tag EPC Gen2v2 (Avery Dennison, Smartrac, Beontag)
Nationwide delivery HCMC 24h · Provinces 3-5 days
24/7 technical support Hotline + Zalo + Email
100% genuine Authorized dealer
5 offices HCM · HN · ĐN · NT · CT
Request a quote Free consultation · Reply within 30 minutes

Sensormatic AMS-9060 is an overhead RFID antenna mounted on the store entrance ceiling — a hidden alternative to traditional EAS pedestal gates. Suitable for premium flagship stores that do not want exposed EAS gates disrupting their design.

Advantages vs pedestal gates: (1) Hidden design — mounted in drop ceiling tiles, not visible from the floor; (2) 3-4m diameter read zone — covers the entire entrance zone, not zone-by-zone like pedestals; (3) Reads 200+ tags/second — sufficient for store peak hours of 50+ visitors/minute.

Combined with the TrueVUE platform for SKU-level loss prevention — alarm when a non-deactivated tag passes through the entrance plus SKU log + timestamp + camera correlate. Popular for Vincom, Crescent Mall, Saigon Centre — Inditex flagship stores (Zara, Pull&Bear).

Frequency RFID UHF 860-960MHz region-tuned
Read range 3-4m diameter zone from ceiling mount (2.5-3m height)
Read rate 200+ tags/second in zone (measured on 4 quad-mode antennas)
Protocol EPC Gen2v2, ISO 18000-6C
Power PoE+ 802.3at single cable
Dimensions 300 × 300 × 50 mm — slim flat panel
Mounting Drop ceiling tile-replacement or surface mount
IP rating IP54 (indoor, splash-resistant)
Integration Sensormatic TrueVUE reader controller required
  • Premium fashion flagship stores — hidden entrance design
  • Watch / eyewear showrooms — luxury without exposed EAS
  • Premium cosmetic shops — Innisfree, Sephora
  • Bookstores + premium stationery — Fahasa flagship
  • Mall fashion court — anchor store entrance
FAQ

Frequently Asked Questions

Can the AMS-9060 replace a pedestal EAS gate?

For RFID UHF: yes, completely. For legacy EAS RF/AM (hard tags): a combo is needed — AMS-9060 for RFID + pedestal EAS for legacy hard tags. Hybrid pattern: AMS-9060 ceiling + Sentinel mini pedestal floor for legacy SKUs.

Does 1 antenna cover 1 entrance? Or are 2 needed?

1 antenna covers an entrance 2.5-3m wide. For large entrances 4m+ or double-doors (Vincom Mall), 2 quad-mode antennas are needed to cover fully + avoid blind spots. An Ninh Số conducts a site survey to decide.

Frequency RFID UHF 860-960MHz region-tuned
Read range 3-4m diameter zone từ gắn trần (2.5-3m height)
Read rate 200+ tag/giây trong vùng (đo trên 4 anten quad-mode)
Protocol EPC Gen2v2, ISO 18000-6C
Power PoE+ 802.3at single cable
Dimensions 300 × 300 × 50 mm — slim flat panel
Mounting Drop ceiling tile-replacement hoặc surface mount
IP rating IP54 (indoor, splash-resistant)
Integration Sensormatic TrueVUE reader controller required
  • Shop flagship thời trang cao cấp — entrance hidden design
  • Showroom đồng hồ / kính mắt — luxury không lộ EAS
  • Cosmetic shop premium — Innisfree, Sephora
  • Bookstore + văn phòng phẩm cao cấp — Fahasa flagship
  • Mall fashion court — anchor store entrance
FAQ

Câu hỏi thường gặp

Can the AMS-9060 replace a pedestal EAS gate?

For RFID UHF: yes, completely. For legacy EAS RF/AM (hard tags): a combo is needed — AMS-9060 for RFID + pedestal EAS for legacy hard tags. Hybrid pattern: AMS-9060 ceiling + Sentinel mini pedestal floor for legacy SKUs.

Does 1 antenna cover 1 entrance? Or are 2 needed?

1 antenna covers an entrance 2.5-3m wide. For large entrances 4m+ or double-doors (Vincom Mall), 2 quad-mode antennas are needed to cover fully + avoid blind spots. An Ninh Số conducts a site survey to decide.