The Suprema FaceStation F2 Face ID time attendance terminal helped XYZ factory reduce time-theft by 80% just 3 months after deployment. With 300 workers, the factory used to lose 120 man-hours per month due to borrowed and proxy-swiped RFID cards — now that figure has dropped to under 20 hours. This case study analyzes the problem, solution, and real-world results in detail.

Customer: XYZ Factory (anonymous) | Industry: Electronic component manufacturing | Scale: 300 workers, 3 shifts/day | Location: Bac Ninh Industrial Park

The Customer's Problem: RFID cards led to 120 man-hours lost per month

The Customer's Problem: RFID cards led to 120 man-hours lost per month
  • Borrowed cards and proxy swiping: 35% of workers regularly asked colleagues to swipe their cards when arriving late or leaving early. Each shift had 15-20 fraud cases.
  • Lost cards and reissuance: An average of 8-12 RFID cards were lost each month, costing 25,000-40,000 VND per card to replace, plus 2-3 days waiting for a new one.
  • No access control: Workers could enter the production area without clocking in, leading to 100-130 man-hours lost per month (equivalent to 15-18 million VND).
  • Difficult reconciliation: The HR department spent 10-15 hours per month checking time attendance logs and manually detecting anomalies.

Solution Deployed by Việt Đức Trí Group: Suprema Face ID Time Attendance Terminal + Turnstile

Solution Deployed by Việt Đức Trí Group: Suprema Face ID Time Attendance Terminal + Turnstile

Việt Đức Trí Group proposed replacing the entire RFID card system with the Suprema FaceStation F2 Face ID time attendance terminal integrated with Kapaisi tripod turnstiles. This solution ensures each worker can only clock in using their own face, completely eliminating proxy card swiping.

  1. Survey and design: Measured 4 main entry gates, determined a flow of 80-120 people/hour/shift. Installed 4 Suprema FaceStation F2 readers (stores 100,000 faces, recognition speed under 0.3 seconds).
  2. Turnstile integration: Connected each FaceStation F2 to a Kapaisi KPS-TD-3106 tripod turnstile. The turnstile only opens when the face is authenticated — completely preventing tailgating.
  3. Time attendance software setup: Synchronized data with the existing HR management software. Set rules: each worker can only clock in once per shift, proxy clocking is not allowed.
  4. Training and pilot run: Organized 3 training sessions for 300 workers, ran parallel with the RFID card system for 2 weeks. Then fully transitioned to Face ID.

Compared to traditional RFID card solutions, the Suprema Face ID time attendance terminal achieves 99.7% accuracy even in low-light conditions or when workers wear masks.

Results Achieved After 3 Months

Results Achieved After 3 Months
  • 80% — Reduction in time-theft rate, from 120 man-hours/month down to 20 hours
  • 15% — Savings in personnel costs due to reduced fake overtime and optimized management
  • 45 million VND/month — Amount saved from eliminating fraud
  • 8 months — Return on Investment (ROI) period for the entire system

"After 5 years of using RFID cards, we thought losing 100-120 man-hours per month was 'normal' in the manufacturing industry. But since switching to the Suprema Face ID time attendance terminal, the fraud rate has dropped to nearly zero. In just 8 months, the system paid for itself. I recommend this solution to 3 partner factories."

— Mr. Nguyen Van Hung, Director of XYZ Factory

Comparison: Suprema Face ID Time Attendance Terminal vs. RFID Cards and Fingerprint

Comparison: Suprema Face ID Time Attendance Terminal vs. RFID Cards and Fingerprint

To clearly see the differences, below is a comparison table between the Suprema Face ID time attendance terminal, RFID cards, and fingerprint sensors based on key criteria for manufacturing factories.

Criteria Face ID Suprema FaceStation F2 RFID Card Fingerprint Sensor
Fraud resistance High (3D anti-spoofing, cannot be borrowed) Low (easily borrowed, proxy swiping) Medium (fingerprint can be copied)
Recognition speed Under 0.3 seconds 0.1-0.3 seconds 0.5-1 second
Monthly operating cost 0 VND (no consumables) 2-3 million VND (replacing damaged/lost cards) 0.5-1 million VND (sensor maintenance)
Operation in dusty/oily environments Good (IP65, dust and water resistant) Medium (cards easily damaged) Poor (dust obscures sensor
Ready to deploy in 7–14 days

Start with a free 60-minute site survey

Our senior technical team will visit your site, assess the current setup, and propose a bundle matched to your business model and budget.