Cat5e UTP Vinacap 4-Pair Network Cable

IN STOCK OFFICIAL WARRANTY 12-24 MONTHS
Category: Cáp mạng Ethernet · SKU:
Request a quote
Giá tuỳ scope dự án — Liên hệ để được tư vấn và báo giá miễn phí trong 24h.
Cat5e UTP Vinacap 4-pair network cable consists of 8 high-purity annealed copper (Cu) conductors, 0.50–0.60 mm diameter equivalent to 22–24 AWG, twisted into 4 pairs, with a PVC outer jacket, supporting Gigabit speed over a maximum distance of 100m.
  • Vỏ ngoài làm từ nhựa PVC chất lượng cao; không bị oxy hóa trong quá trình sử dụng
  • Lớp vỏ nhựa dẻo có tính đàn hồi cao bảo vệ các sợi đồng bên trong tránh bị đứt, cong gập trong quá trình thi công
  • Trên phần vỏ có ghi đầy đủ các thông tin của cáp như tiêu chuẩn, số sợi, số mét
  • 4 cặp dây dẫn làm từ dây đồng (Cu) tinh khiết cao, ủ mềm đường kính 0,50–0,60 mm tương đương 22–24 AWG, bảo đảm tốc độ truyền Gigabit trong khoảng cách tối đa 100m
  • Lõi gồm 8 sợi dây dẫn được bọc 1 lớp nhựa cách điện; 8 sợi dây này được xoắn thành từng cặp với các bước xoắn được tính toán giúp giảm tối đa hiện tượng nhiễu chéo giữa các cặp dây
  • Giữa phần vỏ và phần lõi có 1 lớp nilon chống ẩm bảo vệ cáp
  • 1 sợi dây dù giúp tăng lực căng trong quá trình kéo cáp
Nationwide delivery HCMC 24h · Provinces 3-5 days
24/7 technical support Hotline + Zalo + Email
100% genuine Authorized dealer
5 offices HCM · HN · ĐN · NT · CT
Request a quote Free consultation · Reply within 30 minutes

Cat5e UTP Vinacap 4-pair network cable is a 4-pair network cable from the VinaCap brand, consisting of 8 high-purity annealed copper (Cu) conductors, 0.50–0.60 mm diameter equivalent to 22–24 AWG, twisted into 4 pairs, with a PVC outer jacket, supporting Gigabit transmission speed over a maximum distance of 100m.

Cat5e UTP Vinacap 4-Pair Network Cable - image 1

Key Features

  • Outer jacket made of high-quality PVC; does not oxidize during use
  • The flexible plastic jacket has high elasticity, protecting the inner copper conductors from breaking or kinking during installation
  • The jacket is fully printed with cable information such as standard, number of conductors, and meter count
  • 4 conductor pairs made of high-purity annealed copper (Cu), 0.50–0.60 mm diameter equivalent to 22–24 AWG, ensuring Gigabit transmission speed over a maximum distance of 100m
  • The core consists of 8 conductors covered with 1 layer of insulating plastic; these 8 conductors are twisted into pairs with calculated twist pitches that help minimize crosstalk between pairs
  • Between the jacket and the core there is 1 layer of moisture-resistant nylon protecting the cable
  • 1 rip cord helps increase tensile strength during cable pulling
Cat5e UTP Vinacap 4-Pair Network Cable - image 2

Applicable Standards

  • ISO/IEC 11801 2nd Ed. 2002, jointly issued by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC)
  • ANSI/TIA/EIA 568-A (CAT 5e) & B2.1 (CAT 6)
  • EN 50173 (CAT 5 and 5e); EN 50173-1:2002 CAT 6 (Class E-250MHz)
Cat5e UTP Vinacap 4-Pair Network Cable - image 3

Applications

  • ATM networks up to 155 Megabit per second (Mbps)
  • 1000 BASE-Tx Gigabit Ethernet (IEE802.3a)
  • 100 BASE-Tx Fast Ethernet
  • 10 BASE-Tx Ethernet
  • 16 Mbps Token Ring

Contact 0796 700 777 for a quote.

Thương hiệu VinaCap
Loại cáp Cat5e UTP 4 pair
Số sợi dây dẫn 8 sợi (4 cặp)
Chất liệu dây dẫn Đồng (Cu) tinh khiết cao, ủ mềm
Đường kính dây dẫn 0,50 – 0,60 mm
Cỡ dây 22 – 24 AWG
Vật liệu vỏ Nhựa PVC
Lớp chống ẩm 1 lớp nilon giữa vỏ và lõi
Sợi dây dù 1 sợi, tăng lực căng khi kéo cáp
Tốc độ truyền Gigabit trong khoảng cách tối đa 100m
Điện trở một chiều 9,38 Ω/100m (Max)
Không cân bằng điện trở 3% (Max)
Điện dung công tác tần thấp 5,04 nF/100m (Max)
Không cân bằng điện dung giữa dây với đất 300 pF/100m (Max)
Trở kháng đặc tính (100 ± 15%) Ω
NEXT Near-End Crosstalk
PS-NEXT Power Sum Near-End Crosstalk
ELFEXT Equal Level Far – End Crosstalk
PS-ELFEXT Power Sum Far – End Crosstalk
PS-ACR Power Sum Att to NEXT Ratio
Tiêu chuẩn ISO/IEC 11801 2nd Ed. 2002; ANSI/TIA/EIA 568-A (CAT 5e) & B2.1 (CAT 6); EN 50173 (CAT 5 và 5e); EN 50173-1:2002 CAT 6 (Class E-250MHz)